Loading... Please wait...

Our Newsletter

StoneTech Oil Stain Remover

2.00 LBS
Calculated at checkout

Product Description

STONETECH Professional Marble / Granite Oil Stain Remover

Advanced formula with fresh, citrus scent safely and easily removes deep set, oil-based stains from natural stone, masonry and grout.

Features + Benefits

Pulls out deep, set-in oil stains

Leaves no residue

Will not discolor stone

Easy to use, no messy plastic wrap needed

Where to Use: Natural stone such as marble, granite, limestone, travertine, slate, terrazzo & sandstone. Grout for ceramic & porcelain tile. Masonry & concrete.

Directions: Always test in a small inconspicuous area to determine that the desired results will be achieved. Make sure surface is clean, dry and free of waxes and coatings. .

Using a plastic or wood spatula, stir thoroughly to mix the paste. Apply a 1/4” thick layer of paste to the stain. Insure that the paste extends at least 1"-2" beyond the edge of the stain. Do not cover. Allow 48-72 hours for paste to completely dry to a powder. Remove powder and discard. Allow solvent to completely dry from the stone. If stain is not completely gone after drying, repeat process. Clean up residue and tools with mineral spirits. Reseal cleaned area.

Size and Coverage:

Size and Coverage:

  • 3 oz Can: 1/10-1/5 sq. ft. of surface at 1/4" thickness.
  • 1 Pint Can: 1/10-1/5 sq. ft. of surface at 1/4" thickness.

If you have any questions about this product, please feel free to contact: info@tripointpro.com

Product Videos


Product Videos

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the StoneTech Oil Stain Remover to your wish list.

You Recently Viewed...