Loading... Please wait...

Our Newsletter

StoneTech High Gloss Sealer Quart

2.00 LBS
Calculated at checkout

Product Description


STONETECH Professional

DuPont™ StoneTech® Professional High Gloss Finishing Sealer

1 Quart

Features and Benefits
• Two-in-one formula leaves a wet-look finish and protects against stains
• Easy-to-use, water-based formula
• Interior use

Where to Use
Slate, saltillo, limestone, travertine and concrete floors.
Not intended for use on glazed, polished, or non-absorbing surfaces, wood floors & decks, showers, countertops, or near pool areas.

1. Liberally apply 2-4 even coats with a natural bristle brush, roller, or paint pad applicator. Do not apply product with a sprayer or sponge. Avoid puddling of liquid during application. Failure to apply a sufficient amount of sealer to the surface may result in an undesirable finish or degradation of the coating. More coats may be applied if desired.
2. Allow 30-45 minutes between coats or until surface is dry to the touch.
3. Surface traffic may begin 12 hours after final application; keep installation dry for a minimum of 12 hours; full cure is achieved in 24-48 hours.
4. Keep surface clean and dry as finished surfaces may become slippery when wet.
Note: Above instructions are for reference purposes only. Please follow label directions on back of actual product.

Available Size: Quart: 25-75 sq. ft.

If you have any questions about this product, please feel free to contact: info@tripointpro.com



Product Videos


Product Videos

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the StoneTech High Gloss Sealer Quart to your wish list.

You Recently Viewed...