Loading... Please wait...

Our Newsletter


StoneTech Heavy Duty Exterior Sealer - Qt.

Price:
$29.30
SKU:
WBS12-32
Weight:
2.00 LBS
Shipping:
Calculated at checkout
Quantity:


Product Description

Heavy Duty Exterior Stone & Masonry Sealer. Solvent-Based, water repellent. Quart size

Heavy Duty Exterior Stone & Masonry Sealer 1 Quart Size

(This product is only avaliable in Qt. sizes or smaller due to VOC Regulations)

Provides heavy duty stonecare, natural look protection for exterior natural stone, masonry and grout. Formulated with advanced, solvent-based, silicone technology that protects against tough water-based stains.

Features + Benefits Heavy duty protection against water-based stains Natural look Solvent-based, exterior use Where to Use

Natural stone such as limestone, granite, slate, flagstone, sandstone & bluestone. Masonry & concrete.

Directions Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, thoroughly dry and free of waxes and coatings. Surface temperature should be between 50°F and 80°F.

Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated. Liberally apply an even coat with a paint pad, paintbrush, paint roller or solvent-resistant, low-pressure sprayer. Allow to penetrate the surface for 5-15 minutes; denser material may require more time for sealer to penetrate. During this time, distribute excess over entire area to insure even penetration. Thoroughly wipe the entire surface with a clean dry cloth to completely remove all excess sealer from the surface. DO NOT ALLOW SEALER TO DRY ON THE SURFACE.

A second coat may be needed for porous, absorbent surfaces and should be applied one hour after initial application as directed in steps 2-3. If sealer was not completely wiped off and a residue appears, wipe entire surfae with a towel dampened with sealer. Use a white nylon pad to loosen residue and follow with a clean, white absorbent towel to remove. Do not walk on surface for at least 4-6 hours. Full cure is achieved in 24-72 hours.

Clean equipment with mineral spirits.

Size and Coverage Quart: 50-250 sq. ft.

Expected Wear: 5-10 years


Product Videos

The DuPont™ StoneTech® Professional family of stone sealers (04:30)
Everything you need to safely and effectively protect all types of stone installations. Visit http://www2.dupont.com/Stone_Tech_Professional/en_US/products/Protect/protect.html
  • The DuPont™ St...
    Everything you need to safely and effectively protect all type...

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the StoneTech Heavy Duty Exterior Sealer - Qt. to your wish list.

You Recently Viewed...