2oz. Sample of Water-Based High Gloss Finishing Sealer
eatures and Benefits
• Two-in-one formula leaves a wet-look finish and protects against stains
• Easy-to-use, water-based formula
• Interior use
Where to Use
Slate, saltillo, limestone, travertine and concrete floors.
Not intended for use on glazed, polished, or non-absorbing surfaces, wood floors & decks, showers, countertops, or near pool areas.
Directions
1. Liberally apply 2-4 even coats with a natural bristle brush, roller, or paint pad applicator. Do not apply product with a sprayer or sponge. Avoid puddling of liquid during application. Failure to apply a sufficient amount of sealer to the surface may result in an undesirable finish or degradation of the coating. More coats may be applied if desired.
2. Allow 30-45 minutes between coats or until surface is dry to the touch.
3. Surface traffic may begin 12 hours after final application; keep installation dry for a minimum of 12 hours; full cure is achieved in 24-48 hours.
4. Keep surface clean and dry as finished surfaces may become slippery when wet.
Manufacturer: Stonetech
SKU: D13389080
Sign In
