2-1 formula that leaves a wet-look finish and Protects Stone Gallon
STONETECH Professional
DuPont™ StoneTech® Professional Semi - Gloss Finishing Sealer
1 Gallon
Features and Benefits • Two-in-one formula leaves a wet-look finish and protects against stains • Easy-to-use, water-based formula • Interior use
Where to Use Slate, saltillo, limestone, travertine and concrete floors. Not intended for use on glazed, polished, or non-absorbing surfaces, wood floors & decks, showers, countertops, or near pool areas.
Directions 1. Liberally apply 2-4 even coats with a natural bristle brush, roller, or paint pad applicator. Do not apply product with a sprayer or sponge. Avoid puddling of liquid during application. Failure to apply a sufficient amount of sealer to the surface may result in an undesirable finish or degradation of the coating. More coats may be applied if desired. 2. Allow 30-45 minutes between coats or until surface is dry to the touch. 3. Surface traffic may begin 12 hours after final application; keep installation dry for a minimum of 12 hours; full cure is achieved in 24-48 hours. 4. Keep surface clean and dry as finished surfaces may become slippery when wet. Note: Above instructions are for reference purposes only. Please follow label directions on back of actual product.
Available Size: Gallon: 100-300 sq. ft.
If you have any questions about this product, please feel free to contact: info@tripointpro.com
Sign In
